Curvo Studio

Passive component simulators

Passive components shape voltage, current and stored energy without amplifying anything. This group has three simulators: the resistor, the capacitor and the inductor. The resistor shows Ohm's law, power dissipation, tolerance and the colour code. The capacitor charges and discharges through a resistance so you can see the RC time constant and the energy held in its electric field. The inductor does the same with current and its magnetic field, with the RL time constant and the voltage spike when the current is interrupted. Change the values, the supply and the time scale, and watch the curves update immediately. These three parts are the building blocks of every filter, timer and power supply, so they are a good place to start. Begin with the resistor, then compare how the capacitor and inductor respond over time.

3 interactive models

ResistorObserve how resistance limits current, drops voltage and converts electrical energy into heat.Open simulator
New
CapacitorWatch an electrolytic capacitor charge through a resistor: charge builds up on the plates, the voltage follows an exponential curve and the time constant τ = RC sets the pace.Open simulator
New
InductorSee the current in a ferrite-core inductor rise with the time constant τ = L/R, store energy in its magnetic field and lose inductance once the core saturates.Open simulator

Diagram symbol system: IEC 60617-inspired technical notation